Date
|
News
|
Link
|
PDF
|
Contact
|
4/14/2011
|
Altechna - member of Baltic Photonic cluster
|
|
|
Gintas Slekys
|
|
Inserted by:
Altechna Co.Ltd. |
On 7th April 2011 Altechna joined Baltic Photonics Cluster and with nine other Baltic partners signed an agreement in Tallinn.
Baltic Photonics Cluster (BPC) is a voluntary association of stakeholders in the field of photonics in the Baltic countries, primarily industrial enterprises and
Continue...
|
3/30/2011
|
Laser bonding of glass/glass and glass/silicon
|
|
|
Olli Saarniaho
|
|
Inserted by:
Veslatec Oy |
Advantages:
- Bonding of transparent materials of Si/Glass
and Glas/Glass
- High quality and simple process
- Seams are hermetically sealed
- Accurate process
- High Temeperature in very limited area
- No addiotional material
- High processing speed
|
3/30/2011
|
3 D CW FIBER LASER
|
|
|
Olli Saarniaho
|
|
Inserted by:
Veslatec Oy |
3 D machining centre offers new range of precision machining applications for MEMS, printing, instrument, process and medical industry.
Machining centre with fibre laser is faster, more reliable and very much more controllable than traditional techniques such as Nd:YAG lasers.
Still the
Continue...
|
3/15/2011
|
Altechna presents new product: laser diode driver
|
|
|
Ruta
|
|
Inserted by:
Altechna Co.Ltd. |
Our latest development in the laser driver product line - the Only LDD laser diode controller is now in production. Only features continuous wave and pulsed operation modes based on integrated quartz based pulse generator. Incorporating plenty other features, Only is well established amo
Continue...
|
2/11/2011
|
Coherent Introduces “Meterless” EnergyMax Laser Energy Sensors
|
|
|
Patrick Brandelind
|
|
Inserted by:
Gammadata Instrument AB |
Coherent has expanded their meterless laser measurement concept with a new range of energy sensors in which all meter electronics are miniaturized and integrated within the sensor head cable. Specifically, Coherent’s entire range of high performance EnergyMax sensors is now available in t
Continue...
|
1/18/2011
|
Jenoptik‘s Lasers & Material Processing division at the trade fairs BiOS and Photonics West 2011: Introduction of novelties from the product ranges of diode lasers and solid-state lasers
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Jenoptik’s Lasers & Material Processing division presents its product portfolio at the BiOS trade fair, booth 8522, on 22 and 23 January, 2011, and at the Photonics West, booth 1323, from 25 to 27 January, 2011, both in San Francisco, USA. In addition to the established standard products,
Continue...
|
11/23/2010
|
New laser soldering machine
|
|
|
Dr. Mergenthaler
|
|
Inserted by:
Dr.Mergenthaler GmbH&CoKG |
Dr.Mergenthaler GmbH&Co.KG anounces a new laser soldering machine LWS100 for selective laser soldering of electronic parts. The material can be flexfoil or pcb. As option, the machine is also offered with 4 segment rotary table for preheating and cooling of parts, which have an integrated
Continue...
|
10/6/2010
|
Modular Laser Safety Curtain SHELTER
|
|
|
Alexander Rost
|
|
Inserted by:
LASERVISION GmbH |
In order to stay abreast of the increasing need of large area laser protection LASERVISION is offering a new, modular laser safety curtain with high protection levels (certified acc. to DIN EN 12254).
The new, significantly lighter, multi layer laser safety curtain stands out due to high
Continue...
|
9/6/2010
|
Laser Cutting - One Day Training Seminar
|
|
|
Erling D. Mortensen
|
|
Inserted by:
ATV-SEMAPP |
The Danish Laser ERFA Group is organizing a one-day laser operator training seminar in Fredericia, Thursday, 23rd September 2010.
The course is cunducted by senior engineer, Flemming Olsen, IPU.
The teacher will focus on the operation of lasers, give a review of the laser types that a
Continue...
|
9/2/2010
|
Jenoptik’s Lasers & Material Processing division with new products in crystalline photovoltaic at the European industries leading trade fairs PVSEC
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
The Lasers & Material Processing division of Jenoptik will be from September 6-9, 2010 at the trade fair 25th European Photovoltaic Solar Energy Conference and Exhibition in Valencia, Spain – the European industries leading trade fairs for equipment and technology in the photovoltaic indus
Continue...
|
3/2/2010
|
PowerMax-USB from Coherent - Small Laser Power Meter, Big Features!
|
|
|
Patrick Brandelind
|
|
Inserted by:
Gammadata Instrument AB |
Coherent’s new PowerMax-USB sensors are the first laser power sensors that utilize state-of-the-art miniaturization techniques, integrating an entire instrument within a USB 2.0 cable connector. These new sensors have all the signal processing and power measurement electronics normally con
Continue...
|
2/24/2010
|
Första FIBERLASERN i Skandinavien
|
|
|
Jörgen Peterssson
|
|
Inserted by:
Salvagnini Scandinavia AB |
Salvagnini har installerat den första FIBERLASERN i Skandinavien hos företaget PROWAY i Hyltebruk. Maskinen är utrustad med en helautomatisk hanteringsutrustning för laddning, utplockning och sortering.
|
1/28/2010
|
Gammadata Instrument AB is the new distributor for Coherent in the Nordic and Baltic countries
|
|
|
Patrick Brandelind
|
|
Inserted by:
Gammadata Instrument AB |
Gammadata Instrument is the new distributor for Coherent since October 1st, 2009. The covered territory includes Denmark, Estonia, Finland, Iceland, Lativa, Lithuania, Norway and Sweden.
Sales responsible is Patrick Brandelind and service issues is handled by Lars Holm and Charl
Continue...
|
1/19/2010
|
Jenoptik Lasers & Material Processing division at Photonics West 2010: Presentation of innovations in diode lasers and laser systems
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
The Lasers & Material Processing division of Jenoptik will be from January 26-28, 2010 at the trade fair Photonics West in San Francisco, USA, at booth 1422. In addition to the proven standard products, innovations and further developments in semiconductor materials as well as diode and
Continue...
|
11/9/2009
|
New Diamond E-1000 from Coherent - The smallest 1 kW CO2 laser available.
|
|
|
Patrick Brandelind
|
|
Inserted by:
Gammadata Instrument AB |
The DIAMOND E-1000 is a sealed 1 kW CO2 laser measuring less than 1500 mm x 500 mm x 400 mm - including its integrated power supply - making it the most compact product currently available at this power level.
Packed into this unique design are a host of high performance featur
Continue...
|
9/23/2009
|
Individual laser protection system
|
|
|
Alexander Rost
|
|
Inserted by:
LASERVISION GmbH |
Modular laser barrier system from LASERVISION
Laser protection sometimes requires enclosure or temporary separation of working areas.
Based on the well known and lightweight laser barrier plate material LASERVISION is offering a modular system, which fits the changing needs of the us
Continue...
|
8/13/2009
|
Product news - Low cost bars for 808 nm applications
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
The Diode Lasers business unit of Jenoptik’s Lasers & Material Processing division now offers, aside from the previously available standard range of bars and single emitters, a cost-effective alternative to bars for medical applications such as hair removal.
With an optical output power o
Continue...
|
8/4/2009
|
Product news - New passively cooled diode laser with optimized heat sink design
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
The Diode Lasers business unit of Jenoptik’s Lasers & Material Processing division was presenting at LASER 2009 trade show a new passively cooled diode laser, the JOLD-120-CPNN-1L, with optimized heat sink design.
Outstanding is the around 30% improved cooling efficiency of this laser usi
Continue...
|
7/15/2009
|
New fiber laser pump module with high brilliance
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
The highlight of the trade show LASER 2009 for the Diode Lasers business unit of Jenoptik’s Lasers & Material Processing division was an innovative fiber-coupled diode laser module known as JOLD-50-FC-11. It is based on the coupling of several single emitters and achieves an optical ou
Continue...
|
4/15/2009
|
Nanosecond and picosecond lasers
|
|
|
Richard Arbus
|
|
Inserted by:
Laser2000 AB |
Laser 2000 AB introduces Photonics Industries in the Nordics.
Photonics Industries is a manufacturer of rugged and reliable lasers with high power pulse energy from UV to IR. These lasers are well suited for processing of many different materials. Please contact us for more information
|
2/23/2009
|
New 1 kW, Fiber-Delivered Direct Diode System for Industrial Applications
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
Coherent introduces their first, fiber-delivered 1 kW direct diode laser system for industrial applications. In a highly reliable design based on closed-loop cooling, the HighLight 1000F offers a flexible, mobile solution for today´s industrial applications. Specifically, the new HighLight
Continue...
|
1/21/2009
|
Lasers & Material Processing:
Jenoptik adds another manufacturing level to the Diode Lasers Business Unit.
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Through the acquisition of the Berlin enterprise Three-Five Epitaxial Services AG, Jenoptik has extended their expertise in the field of epitaxial wafer production. For the first time ever, the Diode Lasers Business Unit of Jenoptik’s Lasers & Material Processing division will present the
Continue...
|
12/1/2008
|
Salvagnini introducerar fiber-laser-tekniken i planlaser modell L1X
|
|
|
Jörgen Petersson
|
|
Inserted by:
Salvagnini Scandinavia AB |
På BLECH 2008 i Hannover visade Salvagnini sin nya L1X laserskärmaskin utrusted med fibelaserteknik. Utmärkande för den nya tekniken är:
- Radikalt minskad effektförbrukning
- Ökad skärhastighet i tunnplåt
- Minskade underhållskostnader
|
10/29/2008
|
Changes! Veslatec and Tarkmet has joined forces
|
|
|
Olli Saarniaho
|
|
Inserted by:
VESLATEC OY |
Now we can offer to our customer also precise machining. Find more information from our home pages www.veslatec.com
|
8/12/2008
|
SPI Lasers doubles ‘Power and Control’ to its customers with latest fiber lasers.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
SPI Lasers, a leading designer and manufacturer of fiber lasers, has announced that its latest products will double in power and control capability, enabling customers to cut and weld materials with faster process times and with more advanced control options than ever before. SPI has incre
Continue...
|
8/7/2008
|
Laser Protective Goggle for Patients
|
|
|
Mazyar Mahmoudi
|
|
Inserted by:
LASERVISION GmbH |
For medical laser applications the eye protection of the patient is very important. Therefore LASERVISION offers an especially developed Laser protective goggle apart from the common eyeball protector for the medical sector.
The goggle is especially designed for patients and has been de
Continue...
|
4/2/2008
|
LASERVISION’s Head Support System
|
|
|
Huyen Vu
|
|
Inserted by:
LASERVISION GmbH |
LASERVISION presents their new Head Support System (HSS) a new support system for laser spectacles, which fits very comfortable even for heavy laser eyewear.
The HSS can be used for all LASERVISION laser goggles with DUOFLEX temples. It takes all the weight off the nose and the ears and
Continue...
|
4/1/2008
|
Fiber laser stock clearance.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
BFi OPTiLAS gives customers the chance to purchase discounted ex-demo fiber lasers. The manufacturer , SPI Lasers, runs an extensive ‘Try Before You Buy’ evaluation program. They refresh the evaluation lasers with the new variants of laser on a regular basis and so they are selling off
Continue...
|
2/5/2008
|
Lasers & Material Processing: Jenoptik presented at Photonics West 2008 qcw diode lasers with pulse power of 300 W
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
At the Photonics West Trade Show, which was being staged from January 22 to 24, 2008, in San Jose, California, USA, the JENOPTIK Laserdiode GmbH and JENOPTIK Diode Lab GmbH presented - aside from their innovative and proven standard products - qcw diode lasers with unparalleled output powe
Continue...
|
1/21/2008
|
Plastic goggle for all harmonics of Neodymium lasers
|
|
|
Huyen Vu
|
|
Inserted by:
LASERVISION GmbH |
LASERVISION´s P1008 filter comes in two frames
Nd:YAG lasers are the most commonly used laser systems. Their applications spread across industrial, scientific and medical markets. In addition to the fundamental wavelength of 1064nm more and more interest is being focussed on the harmoni
Continue...
|
1/21/2008
|
Laser Operatør Kursus
|
|
|
Erling D. Mortensen
|
|
Inserted by:
ATV-SEMAPP |
Laser-ERFA-Gruppen/ATV-SEMAPP inviterer til et 1-dags Laser Operatør Kursus i Fredericia, 14. februar 2008.
Kurset er et rent teorikursus, hvor professor Flemming Olsen, DTU fortæller om laserskæring.
Formålet er at give operatører af laserskæremaskiner en teoretisk ballast for deres
Continue...
|
12/14/2007
|
Coherent introduces high power direct diode systems for aerospace, defense, and industrial manufacturing.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
The HighLight series of direct diode lasers combines state-of-the-art micro-optics with laser diodes to produce a high efficiency reliable heat source for a variety of applications. These lasers are ideally suited for heat treating, metal cladding of parts, epoxy curing, paint stripping an
Continue...
|
11/24/2007
|
Precitec Fine Cutting Head for Fiber Laser
|
|
|
Hans Engström
|
|
Inserted by:
Levitronics Lasersystem AB |
Precitec KG, has now further developed the fine cutting head to be used for fiber-, disc-, Nd:YAG- and CO2- laser cutting applications. It is designed for high precision cutting applications with laser power of maximum 500 W, e.g. stent cutting. The fine cutting head has a specially design
Continue...
|
11/13/2007
|
Coherent introduces a new sealed, pulsed CO2 laser offering 400 Watts of average power.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
DIAMOND E-400 is the first sealed, pulsed CO2 laser to offer average power of 400 watts or peak power >1 kW in a fully integrated, compact package. Incorporating the RF power supply within the laser head completely eliminates the RF umbilical in the Diamond E-400, increasing laser reliabi
Continue...
|
11/1/2007
|
Mobile marking system
|
|
|
Richard Arbus
|
|
Inserted by:
Laser2000 AB |
For mobile applications, Laser 2000 now offers users in the Nordic countries an inscription laser system that can be accommodated in the trunk of an automobile and transported on its own wheels around warehouses and factories, and was awarded a prize when it was introduced at the Nuremberg
Continue...
|
9/21/2007
|
SPI Lasers to broaden range of pulsed fiber laser marking products
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
SPI Lasers announces an extension to its pulsed laser product range for marking solutions. SPI Lasers’ 10 & 20W – RM (restricted modulation) Pulsed Laser Modules are the newest members of their marking product family, providing a value-engineered solution that is ideally suited to high vol
Continue...
|
9/7/2007
|
New material for individual laser protection
|
|
|
Huyen Vu
|
|
Inserted by:
LASERVISION GmbH |
Laser safety curtains are the most common solution for large area laser protection.
With the new Laserbarrier system LASERVISION offer the first time a modular system, which fits the changing needs and requirements of laser users.
The patent pending protection material combines very
Continue...
|
8/15/2007
|
New passively cooled QCW diode laser stack
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
JENOPTIK Laserdiode GmbH, the leader in quality of high-power diode lasers, has introduced its new passively cooled QCW diode laser stack (JOLD-x-Q-8A).
With a new passively cooled QCW stack, JENOPTIK Laserdiode GmbH is using their experience in manufacturing high-quality diode lasers i
Continue...
|
8/15/2007
|
Jenoptik Laserdiode further improves expertise in fiber coupling.
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
JENOPTIK unique-mode GmbH’s integration into JENOPTIK Laserdiode GmbH will be completed in August. All activities of the company from Jena, which has fifteen employees and was acquired by Jenoptik in 2006, will be consolidated into JENOPTIK Laserdiode GmbH.
With the merger, Jenoptik Las
Continue...
|
7/19/2007
|
Laser safety windows: Glass or plastic?
|
|
|
Tim Frieb
|
|
Inserted by:
LASERVISION GmbH |
LASERVISION offers a big variety of laser protecting windows.
Which window is the right one for your application? Enclosures around industrial lasers systems are often equipped with laser safety windows. As a matter of principle, there are two different modifications. Either the window
Continue...
|
6/25/2007
|
Coherent acquires high-power laser manufacturer Nuvonyx
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
Coherent Inc. has announced that it has acquired privately held Nuvonyx Inc.(St. Louis, MO). Nuvonyx is a manufacturer of high-power (in excess of 1 kilowatt) laser diode components, arrays, and industrial laser systems for materials processing and defense applications. Combined with Coher
Continue...
|
6/22/2007
|
Diode Laser Group of Jenoptik at
LASER Trade Show with new developments
in high-power diode lasers
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
The conversion of the products to high-efficiency diode-laser bars, which began with the unveiling of new products at LASER two years ago, is completed. The transition to hard-solder mounting for all passively cooled diode-laser types has made it possible for these lasers to reach capaciti
Continue...
|
6/1/2007
|
New: The Diode Laser Group of Jenoptik has a distributor in the US market.
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Since May 2007 the Diode Laser Group of Jenoptik, Germany (www.jenoptik-dlg.com) is working together with RPMC Lasers Inc., USA (www.rpmclasers.com) to distribute in the US market.
The distribution agreement between the Diode Laser Group of Jenoptik (DLG) and RPMC Lasers Inc. includes t
Continue...
|
4/12/2007
|
Get inspired by iDRIVE® – SCANLAB´s fully digital control concept
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB´s innovation redefines the industry standard for galvanometer scan head control. SCANLAB introduces iDRIVE®, a fully digital control concept emerging from the closed loop between the galvanometer’s digital driver and the PC control board RTC® 5.
The RTC® 5 communicates with the
Continue...
|
4/12/2007
|
SCANLAB camera adapter for 355 nm
|
|
|
|
|
Inserted by:
SCANLAB AG |
Designed for coaxial vision through a galvanometer scanning system, the camera adapter is used for process monitoring or alignment compensation during UV laser processing.
Optimized for the highest imaging quality in a typical mico-machining setup, the camera adapter features an optical r
Continue...
|
4/12/2007
|
RTC® 5
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB´s new PC interface board RTC® 5 - which will be released at the LASER 2007 trade fair in Munich - forms the counterpart of the intelliSCAN®-series of scan systems and is a vital part of SCANLAB´s new fully digital iDRIVE® technology.
A new set of features (like multiple tunings
Continue...
|
4/12/2007
|
intelliDRILL® – New Generation of Intelligent Drilling Heads
|
|
|
|
|
Inserted by:
SCANLAB AG |
Following its success with the analog UHP20, SCANLAB again raises standards in laser drilling by introducing the intelliDRILL® 20 to the market, result of innovations and advancements in digital servo control technology.
As opposed to analog drilling heads of conventional servo technolo
Continue...
|
3/20/2007
|
BFi OPTiLAS annonces the new 2007 Ophir catalogue for power and pulse measurements of industrial and scinetific lasers.
|
|
|
Pär Jansson
|
|
Inserted by:
BFi OPTiLAS AB |
The true Measure of Laser performance - Ophir manufactures the most complete line of laser measurement instruments available, both off the shelf and OEM. Ophir instruments measure laser power and laser pulse energy. Ophir power/energy meters have complete plug and play capability where one
Continue...
|
3/9/2007
|
Large-sized plastic laser safety windows against Nd:YAG
|
|
|
Tim Frieb
|
|
Inserted by:
LASERVISION GmbH |
Plastic windows P2001 now also available in dimensions larger than 610x915mm²
Our plastic windows P2001 suitable for Nd:YAG applications at 1064nm are now also available in dimensions up to maximal 1220x915mm². This is already corresponding with a size of more than DIN A0 and should the
Continue...
|
3/8/2007
|
New passively cooled diode laser on an industry standard mount
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
JENOPTIK Laserdiode GmbH, the leader in quality of high-power diode lasers, has introduced its new passively cooled diode laser on an industry standard mount (JOLD-x-CPNN-1L / JOLD-200-QPNN-1L).
Optimizing the quality of semiconductor material of JENOPTIK Diode Lab GmbH, a 100% subsidia
Continue...
|
3/8/2007
|
New fiber-coupled passively cooled diode laser module
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
JENOPTIK Laserdiode GmbH, the leader in quality of high-power diode lasers, has introduced its new passively cooled fiber-coupled diode laser module (JOLD-100-CPXF-2P W / JOLD-140-CPXF-2P W).
Optimizing the quality of semiconductor material of JENOPTIK Diode Lab GmbH, a 100% subsidiary
Continue...
|
3/8/2007
|
New fiber-coupled diode laser module
|
|
|
Mr. Thomas Wittschirk
|
|
Inserted by:
JENOPTIK Laser GmbH |
JENOPTIK unique-mode GmbH, the specialist for high brightness fiber-coupled diode lasers, has introduced its new passively cooled fiber-coupled diode laser module (JUM20k/100/20).
The new diode laser module provides an optical output power of 20 W via 100 µm fiber core with a numerical
Continue...
|
3/1/2007
|
Laser-ERFA-Møde i Fredericia, 13. marts 2007
|
|
|
Erling D. Mortensen
|
|
Inserted by:
ATV-SEMAPP |
Nyheder, aktuelle indlæg og erfaringsudveksling.
Indlæg af repræsentanter for Fraunhofer-Institute Material and Beam Technology (IWS), Finn-Power OY, AGA/Linde, Trumpf GmbH, Freeform Systems AB, DTU og FORCE Technology.
News, presentations and discussion of experiences.
Presentations
Continue...
|
12/12/2006
|
New 20W CW Fibre Laser
|
|
|
Franco Felice
|
|
Inserted by:
MANLIGHT |
MANLIGHT, the French Fibre Laser specialist, presents the new version of its 20W Fibre Laser.
The 20W Fibre Laser is a compact OEM Ytterbium Fibre Laser delivering up to 20W of CW output power, through a near diffraction limited beam (M²<1.1).
The All-Fibre design guarantees the ind
Continue...
|
11/27/2006
|
SUPERSCAN -9 – Size Matters, Compact Design with Performance
|
|
|
Cindy Wolff
|
|
Inserted by:
RAYLASE AG |
A smart miniature format for XY laser beam deflection units with a diameter of 9 mm is invading the market from Wessling. RAYLASE AG has extended its SUPERSCAN family with a miniature unit - the SUPERSCAN -9. This shows the proven RAYLASE technology following the miniaturization trend in t
Continue...
|
8/10/2006
|
11th NOLAMP CONFERENCE
|
|
|
Veli Kujanpää
|
|
Inserted by:
LUT / Laser Processing Laboratory |
11th Nordic Conference in Laser Processing of Materials
Lappeenranta, Finland
August 20-22, 2007
The purpose of the NOLAMP conference is to bring researchers, industrialists and students together for free and informal discussions on applications of lasers in materials processing
Continue...
|
7/21/2006
|
Laser 2000 organizes the 1st International Symposium on Laser-Micromachining
|
|
|
Richard Arbus
|
|
Inserted by:
Laser2000 AB |
To give end users and laser specialists a new platform for information exchange and to present innovative solutions the first “International Symposium on Laser micro machining” will be held this year in Chemnitz/Germany. With top-class lectures and speakers from industry and research the o
Continue...
|
7/7/2006
|
BFi OPTiLAS annonces the new Ophir catalogue for power, pulse and profile measurements of industrial and scinetific lasers.
|
|
|
Pär Jansson
|
|
Inserted by:
BFi OPTiLAS AB |
The true Measure of Laser performance - Ophir manufactures the most complete line of laser measurement instruments available, both off the shelf and OEM. Ophir instruments measure laser power, laser energy, laser beam profile and spectrum. Only Ophir power/energy meters have complete plug
Continue...
|
7/4/2006
|
SCANLAB camera adapter -
|
|
|
SCANLAB AG
|
|
Inserted by:
SCANLAB AG |
Laser processing systems often rely on galvanometer-based scan heads to position the laser beam with exceptional speed and precision. Increasingly, applications also require vision systems for simultaneous process control or determination of work-piece orientation.
Direct visual observati
Continue...
|
6/20/2006
|
New catalogue of power meters, heads and probes
|
|
|
Richard Arbus
|
|
Inserted by:
Laser2000 AB |
Laser 2000 AB is now releasing the 2006 catalogue showing the complete range of power measurement tools, including a complete family of OEM products.
The power covered by our extensive range of products is from 200 mW to 10 kW for YAG, CO2, excimer, Laser diodes, Erbium lasers, fiber lase
Continue...
|
6/20/2006
|
New catalogue of power meters, heads and probes
|
|
|
Richard Arbus
|
|
Inserted by:
Laser2000 AB |
Laser 2000 AB is now releasing the 2006 catalogue showing the complete range of power measurement tools, including a complete family of OEM products.
The power covered by our extensive range of products is from 200 mW to 10 kW for YAG, CO2, excimer, Laser diodes, Erbium lasers, fiber lase
Continue...
|
4/5/2006
|
LaserTurn from Aerotech - a direct-drive linear and rotary motion platform aimed at high-end cylindrical laser machining applications.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
Aerotech’s LaserTurn™ combines high performance, direct-drive brushless linear and rotary positioning stages with automated workpiece handling and provision for customised tooling - for a completely integrated motion solution for high-throughput cylindrical laser machining applications. Th
Continue...
|
3/15/2006
|
INTELLIGENCE COMBINED WITH HIGH LASER POWER - intelliWELD 30 FC
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB AG announces the release of the intelliWELD 30 FC, a smart and compact 3D-scan system for high power disk or fiber lasers.
Designed for robot-assisted welding applications, this 3D-scan system is capable of swiftly positioning the laser beam along 3D contours.
While a robot guide
Continue...
|
3/8/2006
|
SPI offers 30 day FREE fiber laser evaluation.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
Fiber lasers are now a proven technology in the field of materials processing for cutting, welding, sintering, micromachining, ablating, marking… the list goes on. What you may not know is that compared with more established laser technologies, the redPOWER™ series of fiber lasers from SPI
Continue...
|
3/6/2006
|
Supply optical components
|
|
|
wei
|
|
Inserted by:
Changchun Fortune Optronics,Inc. |
Our company is located in Changchun city-traditional optical base, North China. We could manufacture optical Lenses, windows, mirrors, prisms, beamsplitters, Narrow Bandpass Filters, Diffraction grating, specializing in cylindrical Lens, ball lens, rod lens and condenser lens.
If you are
Continue...
|
3/1/2006
|
AVIA high power Q-switched DPSS Lasers from Coherent - now also in green.
|
|
|
info.se@bfioptilas.com
|
|
Inserted by:
BFi OPTiLAS AB |
AVIA™ is a family of high-power, all-solid-state, diode-pumped, frequency-tripled or doubled, Q-switched lasers, available with average power ranging from 350 mW to >30W.
Since 1998, AVIA lasers have been the leading choice for serious UV materials processing and microvia formation for
Continue...
|
2/27/2006
|
New fiber-coupled diode laser of highest brilliance and absolute quality
|
|
|
Dr. Deltev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
At Photonics West 2006 in San Jose, USA, the German company JENOPTIK Laserdiode GmbH (JOLD) presented a new passively cooled fiber-coupled diode laser with a significantly higher brightness and a substantial reduced volume than the preview fiber-coupled diode lasers.
The new fiber-coupled
Continue...
|
2/14/2006
|
Nmark - Integrated galvo and motion control by Aerotech
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
Aerotech’s Nmark™ VCT and NmarkTM GRC products provide a comprehensive galvo control package for both vector and graphics based marking applications. Galvo motion and operating parameters can be controlled directly from within the Automation 3200 program space providing a single, integrate
Continue...
|
1/24/2006
|
JENOPTIK Diode Laser Surpasses the Output Power of 500 Watts per Bar
|
|
|
Dr. Deltev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Jena, 1/19/2006. High-power diode lasers generate their radiation from bar-shaped semiconductors based on GaAs. They are the most efficient sources of artificial light available. Their broad industrial use is still in the early stages and the potential of this type of laser is far from rea
Continue...
|
11/17/2005
|
SCANLAB proudly presents - a new generation of scan heads
|
|
|
|
|
Inserted by:
SCANLAB AG |
The new scan head concept intelliSCAN will be available also for larger apertures (20 mm and above) at the beginning of 2006.
The intelliSCAN concept not only allows better dynamics than classic analog driver designs but in combination with our RTC4 control card features a large number of
Continue...
|
11/10/2005
|
KANTUM ELECTRONICS Co., Ltd. and JENOPTIK Laserdiode GmbH jointly found JENOPTIK Laserdiode Japan Co., Ltd
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Jena, Germany / Tokio, Japan, November 9, 2005
The Jenoptik subsidiary JENOPTIK Laserdiode GmbH together with the company KANTUM ELECTRONICS Co., Ltd. from Tokyo, Japan have founded a new company, which has been backdated to the first of August, 2005 by the name of JENOPTIK Laserdiode Ja
Continue...
|
11/4/2005
|
SCANLAB AG: We have moved to a new location!
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB´s recent growth and future plans have necessitated moving to brand new facilities.
Our new corporate headquarters is close to our former location. Updated directions on how to get there are posted on our website at www.scanlab.de.
Our new contact information is:
SCANLAB AG
Continue...
|
11/1/2005
|
SPI introduces CW/modulated fiber laser delivering 200 Watt.
|
|
|
Patrick Brandelind
|
|
Inserted by:
BFi OPTiLAS AB |
The redPOWER™ series of fiber lasers from SPI has been designed to meet the highest standards of reliability, repeatability and user safety. The commercial advantages of fiber lasers over alternative technologies are far reaching: improved line speeds, finer machining capabilities, reduced
Continue...
|
10/26/2005
|
We are moving!
|
|
|
Sandra Bartl
|
|
Inserted by:
SCANLAB AG |
SCANLAB´s recent growth and future plans have necessitated moving to brand new facilities. Our new corporate headquarters is close to our former location. Updated directions on how to get there are posted on our website at www.scanlab.de.
Our new contact information is.
SCANLAB AG
S
Continue...
|
10/25/2005
|
Kilowatt Line Laser for Surface Treatment
|
|
|
Erik C. Swenson
|
|
Inserted by:
LIMO-LISSOTSCHENKO MIKROOPTIK GmbH |
With the LIMO2000-Cxxx, LIMO GmbH presents a new product line for the homogeneous illumination of surfaces. The shape of the beam can be freely set through the use of the patented LIMO Homogenisation Micro-optics. Either a Gaussian or a rectangular beam profile, vertical or parallel to the
Continue...
|
10/19/2005
|
RAYLASE and Azpect – Partnership for Northern Europe
|
|
|
Cindy Wolff
|
|
Inserted by:
RAYLASE AG |
RAYLASE AG, world-wide trend-setting in developing modular components and electronic devices for deflection and modulation of laser beams, closed a distribution contract with Azpect in Södertälje for the exclusive selling of RAYLASE products in Scandinavia and the Baltic states. Azpect is
Continue...
|
10/19/2005
|
RAYLASE presents a Quantum Leap in Raw Processing Speed with 3-Axis Systems
|
|
|
Cindy Wolff
|
|
Inserted by:
RAYLASE AG |
How is it possible to significantly improve such a powerful and well tried and tested Technology?
RAYLASE delivers an answer based upon a new exclusive design of its highly regarded 3 Axis System AXIALSCAN.
It is only one year ago that RAYLASE rocked the industrial boat by delivering 3
Continue...
|
10/7/2005
|
BFi OPTiLAS introduces Pulsed Marking Fiber Lasers from SPI
|
|
|
Patrick Brandelind, Phone: +46 18 56 58 33
|
|
Inserted by:
BFi OPTiLAS AB |
The redENERGY™ series of pulsed fiber MOPA lasers is designed to offer efficiency and reliability for OEM system integrators requiring pulsed laser souces traditionally serviced with Q-switched diode-pumped solid state lasers.
Features:
- Up to 10kW peak power
- Programmable
Continue...
|
9/28/2005
|
New Fine Cutting Head from Precitec
|
|
|
Hans Engström
|
|
Inserted by:
Levitronics Lasersystem AB |
Precitec KG, now introduces a new fine cutting head for Nd:YAG-cutting applications. It is designed for high precision cutting applications with laser power of maximum 500 W, e.g. stent cutting.
The fine cutting head has a specially designed optical lens system for optimum focusing prop
Continue...
|
9/21/2005
|
TWI ´Make it with Lasers´ Event - 29 September 2005
|
|
|
Abi Lowther
|
|
Inserted by:
TWI Ltd |
Step into the Light -
LASERS - The Competitive and Cost Effective Solution.
More information at www.miwl.org.uk or email miwl@twi.co.uk
|
9/6/2005
|
hurrySCAN 30 with varioSCAN 40FLEX
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB introduces a new, modular 3-axis scan system consisting of a varioSCAN 40FLEX directly mounted onto a hurrySCAN 30 scan head.
With its 30-mm aperture the hurrySCAN 30 extends the industry-proven hurrySCAN 20/25 series with integral water and air cooling provisions. These scan hea
Continue...
|
9/6/2005
|
SCANcube 10 – Ultra-Compact Sealed Scan Head with 10 mm Aperture
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB is extending the successful SCANcube scan head series with the SCANcube 10. This ultra compact scan head with an aperture of 10 mm is optimized for industrial applications. Its 1 liter volume is only 1/3 of the industry standard. With a weight of less than 1.9 kg it is one of the l
Continue...
|
9/6/2005
|
varioSCAN FC Dynamic Focusing Unit: The Future of Laser Welding
|
|
|
|
|
Inserted by:
SCANLAB AG |
The new varioSCAN FC further demonstrates SCANLAB’s leadership in the multi-kilowatt scan solution market.
The varioSCAN FC is a dynamic focusing unit that quickly and precisely positions the laser focus along the optical axis. Combining the varioSCAN FC with a powerSCAN-series 2D scan
Continue...
|
9/6/2005
|
hurrySCAN II 7 – Episode III of a Success Story
|
|
|
|
|
Inserted by:
SCANLAB AG |
SCANLAB proudly introduces the hurrySCAN II 7, the newest member of the very successful hurrySCAN II series. With a 7 mm useable aperture, this new model extends the product range to cover small apertures and offers record-breaking speed.
This quantum leap in performance is made possibl
Continue...
|
9/6/2005
|
A New Scan Head Generation – intelliSCAN
|
|
|
|
|
Inserted by:
SCANLAB AG |
At the LASER 2003 trade show, SCANLAB AG presented the first member of a new generation of scan heads – the intelliSCAN 10. The galvanometer scanners in the intelliSCAN 10 are driven via newly-developed digital servo amplifiers instead of traditional analog electronics. Employing a high-pe
Continue...
|
8/24/2005
|
The bar has been raised
|
|
|
Dr. Deltev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Jena, 22.8.2005
High-power diode lasers are the most effective artificial light sources. This type of laser’s use in the industrial field still is in the early stages and its potential in general has largely yet to be explored.
In the research and development department of the JENOPTIK
Continue...
|
8/2/2005
|
Lasercutting for large plates
|
|
|
Antti Jokitalo
|
|
Inserted by:
HT Lasertekniikka Oy |
HT Lasertekniikka has a new 6kW CO2
lasercutting machine with 2*6 m table, located
in Järvenpää, 40 km from Helsinki.
Trumph L6050 is equipped by latest
technology and large table gives new
opportunities for material optimization.
HT lasertekniikka is the leading laser-
and water
Continue...
|
6/23/2005
|
JENOPTIK Laserdiode GmbH extends the product range based on high-efficiency bars
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
Jena, June 10, 2005. At the Laser 2005 in Munich JENOPTIK Laserdiode GmbH shows the extension of it’s product line based on high-efficiency bars for the first time.
All conduction cooled products which are currently based on high-power diode lasers with 40 W cw optical output power opti
Continue...
|
5/30/2005
|
Tampere Laser Summit Seminar 2005
|
|
|
Jorma Vihinen
|
|
Inserted by:
Tampere University of Technology |
HUIPPUSEMINAARI UUSIEN LASER-TEKNOLOGIOIDEN MAHDOLLISUUKSISTA
Seminaari välittää viimeisintä tietoa ja visioita uusien laserien mahdollisuuksista tuotannossa. Seminaarin aamupäivän ohjelma käsittelee strategisia mahdollisuuksia. Iltapäivän ohjelma keskittyy laserien käyttöön mikrovalmis
Continue...
|
5/3/2005
|
Aerotech supplies Automation Solutions for Laser Processing.
|
|
|
Patrick Brandelind Tel: +46 18 56 58 33
|
|
Inserted by:
BFi OPTiLAS AB |
BFi OPTiLAS Nordic Operations is proud to offer Automation Solutions from Aerotech, a company committed to serving the unique requirements of the laser processing industry. Focused in the areas of mechanics, controls, software, and laser control provides end users, systems integrators, and
Continue...
|
4/29/2005
|
Laser-ERFA-Møde i Middelfart, 26. maj
|
|
|
Erling D. Mortensen
|
|
Inserted by:
ATV-SEMAPP |
Laserstyregruppen i ATV-SEMAPP inviterer til varieret og spændende laser-erfa-møde, 26. maj i Middelfart.
Mødet fokuserer om formiddagen på erfaringsudveksling inden for laserskæring og –svejsning og under erfaringsudvekslingen er der mulighed for at drøfte de problemstillinger, som delt
Continue...
|
4/25/2005
|
BFi OPTiLAS offers Industrial Laser Beam Analyzers from Ophir
|
|
|
Pär Jansson Tel:+46 18 56 58 39
|
|
Inserted by:
BFi OPTiLAS AB |
The BA500 is a comprehensive laser beam analysis system for pulsed industrial Nd:YAG and Diode lasers for monitoring all important laser beam parameters so as to obtain reproducible laser cutting/welding process results.
The BA500 measures average power, energy per pulse, spatial beam p
Continue...
|
4/19/2005
|
KERN launches High Speed Engraving
|
|
|
|
|
Inserted by:
Kern Electronics and Lasers, Inc. |
High Speed Engraving is now available for the hobbyist as well as the professional woodworker. Our NEW gantry laser design with rapid acceleration, will allow you to raster engrave up to 60
|
4/6/2005
|
BFi OPTiLAS offers high power fiber lasers from SPI
|
|
|
Patrick Brandelind Tel: +46 18 56 58 33
|
|
Inserted by:
BFi OPTiLAS AB |
SPI develops and manufactures state-of-the-art CW, modulated and pulsed fiber lasers, components and subsystems, with powers ranging from Ws to kWs for many industrial applications, such as cutting, welding, micro-machining, materials processing, marking and printing. The advantages of fib
Continue...
|
3/30/2005
|
Firewire beam profiler
|
|
|
Kenneth Ferree
|
|
Inserted by:
Ophir-Spiricon, Inc. |
Spiricon introduces a new firewire based beam profiler. We can profile lasers from nanowatts to Kilowatts CW.
|
3/30/2005
|
Spiricon Introduces Power and Energy Meters
|
|
|
Kenneth Ferree
|
|
Inserted by:
Ophir-Spiricon, Inc. |
Spiricon one of the leaders in Laser Beam diagnositcs has opened a new division specializing in laser power and energy meters! Please visit our new website at. www.spiriconpower.com
|
3/4/2005
|
Percussion drilling of holes in polymers
|
|
|
Leif Højslet, Head of Centre, Ph.D.
|
|
Inserted by:
Danish Technological Institute |
The first Danish MicroFactory is now in full operation. In a tandem setup of a CO2 and an Excimer laser high precision holes with diameters from 10 - 250 µm can continously be center-cut in apertures/ oblates in rolled polymer film. The CO2 laser cuts the periphery with three fixing points
Continue...
|
2/17/2005
|
Femtosecond micromachining facility
|
|
|
Martin Jensen
|
|
Inserted by:
Danish Technological Institute |
With the installation of a Clark-MXR 2161i Ti:Sapphire femtosecond laser earlier this year, the Danish Technological Institute is ready to undertake micromachining tasks in a wide range of materials. This is an expansion of our previous services, which were based on an excimer laser. Apart
Continue...
|
2/1/2005
|
New fiber-coupled diode laser module of significantly higher output power
|
|
|
Detlev Wolff; Denise Thim
|
|
Inserted by:
JENOPTIK Laser GmbH |
Jena/San Jose, January 25, 2005. At the Photonics West 2005 in San Jose, USA, JENOPTIK Laserdiode GmbH, a subsidiary of JENOPTIK AG in Jena, Germany, presented a new passively cooled fiber-coupled diode laser module JOLD-100-CPXF-4P delivering a significantly higher output power of 100 wat
Continue...
|
11/4/2004
|
MicroPercussionFactory
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
MicroPercussionFactory: In collaboration with the Danish company Moeller & Devicon A/S, a world leading specialist in production automation for the medico induustry, DTI is launching a MicroFactory for laser percussion drilling of precision holes in polymer films. The setup consists of a C
Continue...
|
10/20/2004
|
The SUPERSCAN-20 from RAYLASE - a station wagon with the ambitions of a Racing Car
|
|
|
Peter von Jan
|
|
Inserted by:
RAYLASE AG |
Wessling, Germany. The newly born product from RAYLASE vividly demonstrates that the team from Wessling has truly earned the Prize presented to it by the Bavarian Government for its Innovative approach to product development and marketing. The SUPERSCAN-20 brings the relatively large diame
Continue...
|
10/20/2004
|
Precise, Fast and Profitable - SUPERSCAN familiy of RAYLASE AG
|
|
|
Peter von Jan
|
|
Inserted by:
RAYLASE AG |
Wessling, Germany. RAYLASE AG proudly presents a new generation of XY deflection heads, which offer highest speed and maximum precision. The „SUPERSCAN-Family“ completes and strengthens the well-known RAYLASE AG product range. RAYLASE AG offers dedicated deflection heads for different app
Continue...
|
10/17/2004
|
High Speed produktion af korte rør
|
|
|
|
|
Inserted by:
Enghave Teknik ApS |
Laser High-Speed-Rohrproduktionsanlage
Exklusiv auf der EuroBLECH 2004 in Hannover präsentiert der Spezialmaschinenbauer weil engineering GmbH, Müllheim, seine neueste Innovation: die kompakte
|
10/1/2004
|
New DOMINO HIGH SPEED
|
|
|
Sales department
|
|
Inserted by:
Prima Scandinavia AB |
Prima Scandinavia AB can now offer a new DOMINO HS. It is the 2D/3D laser machine with the best performances on the market. Speed, accuracy, versatility at low cost.
|
9/29/2004
|
Kern Lasers launches NEW website
|
|
|
Dorothy A. Beyer
|
|
Inserted by:
Kern Electronics and Lasers, Inc. |
Kern Electronics and Lasers, Inc. located in Wadena, Minnesota U.S.A. launches their NEW website. Check it out! New photos and information about products. For FREE samples of laser cutting and laser engraving items call
1-218-631-2755 or send your material and photos or designs. We cu
Continue...
|
9/15/2004
|
Fiber lasers - NEW benchmark in laser marking
|
|
|
Schamriss Andreas
|
|
Inserted by:
OPTIRAY Laser GmbH |
OPTIRAY Laser GmbH has presented with big response at productronica 2003 the first industrial PULSED FIBER LASER marking system. The product range of 10W and 20W pulsed ytterbium lasers mark the beginning of a new age of maintanance free and reliable industrial laser marking.
|
9/2/2004
|
PRIMA INDUSTRIE and SALVAGNINI, approve a wide R&D and commercial cooperation agreement
|
|
|
Riccardo Dolcetta
|
|
Inserted by:
Salvagnini Scandinavia AB |
The boards of directors of PRIMA INDUSTRIE and SALVAGNINI, ranking among the main Italian machine tools manufacturers, approve a wide R&D and commercial cooperation agreement
Press release:
Torino, Italy, July 8, 2004 — Prima Industrie S.p.A. and Salvagnini B.v. have signed a Memorand
Continue...
|
8/19/2004
|
Laser - husudstilling 27.-29. oktober
|
|
|
Henning Lundorf
|
|
Inserted by:
A-V-N Maskin AS - Nova Laser |
Nova Laser - A-V-N Maskin AS har husudstilling den 27., 28. og 29. oktober, hver dag kl. 9-16, hvor der er rig lejlighed til at få demonstration af laseranlæg til forskellige formål og en god fagsnak om industrielle lasere og deres anvendelse.
|
8/12/2004
|
1-day Conference on Laser Micro Machining
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
Full programme see our web. Time to sign in for this exiting meeting on the latest trends and industrial applications. On-line registration is open.
|
8/2/2004
|
Laser-ERFA-Møde og besøg hos Grundfos A/S
|
|
|
Erling D. Mortensen
|
|
Inserted by:
ATV-SEMAPP |
Program for laser-ERFA-Møde 7. oktober 2004 kan nu ses via www.atv-semapp.dk. Mødet arrangeres af den danske Laser-ERFA-Gruppe/ATV-SEMAPP i samarbejde med Grundfos.
|
7/29/2004
|
Raster engraving on 6 square meters
|
|
|
Jörg Walter
|
|
Inserted by:
eurolaser |
To expand the numerous possibilities of processing material with the eurolaser laser cutting systems (LCS) eurolaser has developed an option called Raster Engraving Unit (REU).
The Raster Engraving Unit is used to pass out pixel graphics with the eurolaser LCS beside the usual vector gra
Continue...
|
7/29/2004
|
eurolaser is expanding its wide range of cutting systems with a compact laser engraving system (LES).
|
|
|
Jörg Walter
|
|
Inserted by:
eurolaser |
The XS-330 is designed for industrial requirements in serial- and mass production; for processing of wood, acrylic, leather, stone, anodised aluminium, glass, etc. ...
The laser engraving system has a working area of 635 x 330mm and can be configured with laser power of 40, 60 and 100 W
Continue...
|
6/30/2004
|
1-day conference on Laser Micro Machining, September 1st
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
Programme/ on-line registration is now available at www.sensortec.dk.
A conference overview is given in the attached PDF-file.
|
6/24/2004
|
The best way to 50W of power.
A new generation of diode lasers was introduced with acclaim by JENOPTIK Laserdiode GmbH at Photonics West 2004.
|
|
|
Dr. Detlev Wolff
|
|
Inserted by:
JENOPTIK Laser GmbH |
JENOPTIK Laserdiode GmbH (JOLD), headquartered in Jena, Germany, surprised the industry at Photonics West 2004 from January 27-29, 2004 with a true innovation: horizontal stacks with a newly developed cooling system.
„Our product combines perfect cooling, easy of installation and outsta
Continue...
|
6/21/2004
|
EWF special course in Laser Welding in Sweden
|
|
|
Hans Engström
|
|
Inserted by:
Luleå University of Technology |
An 7 days EWF special course in laser welding is planned at Luleå University of Technology with participants from the Swedish industry. The course is devided in four parts and will take place on three different occations at the Luleå University of Technology during September to December 20
Continue...
|
6/21/2004
|
Low cost PSD´s!
|
|
|
Bo Nilsson
|
|
Inserted by:
AAAAA Nordic AB |
A PSD must not be expensive. Look her for two very cheap types:
|
5/22/2004
|
The Danish MicroLaserFactory
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
En ny service til den Nordiske plast- og medico-industri.
·Laser texturering af polymerer
·Laser fremstilling af præcise huller i folier
·Laser udskæring og mærkning
·Robot-styret laser svejsning af polymerer
·SEM QA kontrol af laserbearbejdede emner
·Rådgivning om laserteknologi
Continue...
|
5/22/2004
|
1-Day International Conference on Laser Micro Machining
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
Date: September 1st, 2004, 9 am - 17 pm,
Place: DTI, Taastrup
Topics:
-State-of-the-art laser technology in relation to nano and micro scale production
-Laser texturering of materials in the micro scale domain
-Laser machining using pico and femto second lasers
-Fiberoptic lasers
Continue...
|
4/13/2004
|
New Cladding Head
|
|
|
Hans Engström
|
|
Inserted by:
Levitronics Lasersystem AB |
A new co-axial cladding head for Nd:YAG-lasers has been introduced on the market by Precitec KG.
|
3/30/2004
|
Corus predicts bright future for laser welding
|
|
|
Ann Marie Brown
|
|
Inserted by:
Corus Construction and Industrial |
Mithrae, the 25kW laser owned and operated by Corus, has been called into action to improve the production rate and reduce the weight of a component for the construction and earth moving equipment industry.
A leading manufacturer approached Corus to tap into the company’s laser weldin
Continue...
|
3/26/2004
|
Synrad Ships
Firestar f400 & Firestar f201
Fully Integrated CO2 Lasers
For Demanding Industrial Applications
Newest members of the Firestar family provide the best cost per watt laser solutions available
|
|
|
Alexandra Barnsbee
|
|
Inserted by:
Synrad Inc. |
Mukilteo, WA, March 24, 2004- Synrad Inc., the world’s leading provider of sealed CO2 lasers today announced the availability of the Firestar f400 and the Firestar f201, fully integrated laser systems for the most demanding of applications in industrial materials processing.
The newest
Continue...
|
3/25/2004
|
Directed Light offers Tube Cutting and Welding to the Medical Device Industry
|
|
|
Barbara Kuntz
|
|
Inserted by:
Directed Light |
Successful laser cutting of thin-wall small diameter tubes for medical use requires a precise combination of the proper equipment married with applications expertise. Laser operators need to have a thorough understanding not only of the properties of the material being cut – whether titan
Continue...
|
3/25/2004
|
Directed Light - One Stop Shopping for Laser Safety Glasses and Goggles for Medical Use
|
|
|
Barbara Kuntz
|
|
Inserted by:
Directed Light |
Directed Light is pleased to offer a comprehensive line of laser safety eyewear for both patient and doctor use in medical offices that operate IPL lasers for hair removal, skin treatments, leg veins, and other medical purposes.
|
3/25/2004
|
High Speed Fine Marking of Metals and Plastics
|
|
|
Barbara Kuntz
|
|
Inserted by:
Unitek Miyachi |
Unitek Miyachi is pleased to announce the release of its new LMV1000 diode-pumped Nd:YVO4 laser marker which is designed to produce finer and smaller marks on ever-decreasing part real estate as in the electronics and medical industries.
|
3/25/2004
|
Unitek Miyachi Introduces New, High Speed Aluminum Laser Welder
|
|
|
Barbara Kuntz
|
|
Inserted by:
Unitek Miyachi |
Unitek Miyachi is pleased to announce the release of its new LW300AL laser welder designed to significantly increase welding speed and achieve deeper penetration in laser-weldable aluminum alloys; crack-free welds are attainable with weld speeds up to 3 times faster than conventional laser
Continue...
|
3/23/2004
|
Laser Modelling in the Mountains
|
|
|
Alexander Kaplan
|
|
Inserted by:
Luleå University of Technology |
From 21 to 23 January 2004, for the 17th time the annual event M4PL 17 - Meetings on Mathematical Modelling of Materials Processing with Lasers - took place in the Austrian alps in Igls/Innsbruck - just beside the Olympic downhill slope. Luleå TU in cooperation with Vienna TU regularly coo
Continue...
|
3/2/2004
|
Lasertyöstö tutuksi opetusmateriaali CD
|
|
|
Jyrki Latokartano
|
|
Inserted by:
Tampere University of Technology |
ESR - Lasertyöstön oppimisympäristö projektissa tuotettu suomenkielinen opetusmateriaali on nyt kaikkien halukkaiden saatavilla omakustannehintaan.
Materiaali koostuu lasertyöstön keskeisistä aihealueista sisältäen mm:
Lasersäteilyn perusteet
Laserlähteet
Laserleikkaus
Laserhitsau
Continue...
|
12/2/2003
|
Air Liquide Danmark - Bifocal Service
|
|
|
Ole Sørensen Phone: +4576252305
|
|
Inserted by:
Air Liquide Danmark |
New Concept of Service to increase and optimise the productivity in Laser Cutting with dual focus lenses. You achieve: Greater cutting thicknesses at a same power level.Higher cutting speeds.Ignition improvement.Drosses free cutting.
|
11/30/2003
|
New YAG Cutting Head from Precitec
|
|
|
Hans Engström
|
|
Inserted by:
Levitronics Lasersystem AB |
The new compact processing head Y 30/22 from Precitec KG, Germany, is specially developed for robot applications and offers a forward-looking solution for distance-controlled 3D cutting with Nd:YAG lasers.
The system consists of an integral drive for gap-regulation and a cutting head
Continue...
|
11/12/2003
|
Laser machining of polymer-based microsystems
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
The Danish Technological Institute has established a new laser contract laboratory for machining of polymer-based microcomponents. The laboratory facilities comprise:
- An Excimer laser work station for precision machining down to 2 µm.
- A CO2 laser work station for machining struc
Continue...
|
11/12/2003
|
High precision holes in polymer membranes
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
Excimer laser machining:
High precision, reproducible holes were percussion drilled with the excimer laser and then viewed with our SEM. Example images on our WEB-page show a consistent array in a polymer membrane, with the zoomed image showing the charateristic sidewall shape. Typical
Continue...
|
11/12/2003
|
Free form o-rings for sealing/packaging
|
|
|
Leif Højslet
|
|
Inserted by:
Danish Technological Institute |
The contruction of microfludic systems, e.g., Lab-on-a-chip chemical/biochemical systems, requires a very tight sealing between the channel/ reservoir holding substrate and the lid. Furthermore, a good sealing is required around the active sensor elements to prevent the liquid to interfere
Continue...
|
10/28/2003
|
VIRTUELA – The Virtual EuroLaser Laboratory
|
|
|
Alexander Kaplan
|
|
Inserted by:
Luleå University of Technology |
VIRTUELA has been an EU-pilot project, funded by the Leonardo da Vinci programme, with the purpose of partially replacing laser laboratory experiments by virtual interactive computer simulation. A CD-ROM has resulted, suitable for teaching at different levels. The lab curriculum comprises
Continue...
|
10/8/2003
|
EWF Special Course in Laser Welding
|
|
|
Hans Engström
|
|
Inserted by:
Luleå University of Technology |
An 7 days EWF special course in laser welding has been carried out at Luleå University of Technology with participants from the Swedish industry. The course was devided in four parts and took palce at three different occations at Luleå University of Technology. The course has given theoret
Continue...
|
6/23/2003
|
Kurser for laseroperatører
|
|
|
Erling Mortensen
|
|
Inserted by:
ATV-SEMAPP |
Laser-ERFA-Gruppen/ATV-SEMAPP afholder i perioden 18.-21. august to kurser for laseroperatører, dels et 1-dags kursus for personer uden særlige forudsætninger og dels et 3-dages kursus for personer med mindst to måneders erfaring fra ansættelse i en virksomhed med laserbearbejdning.
Kurse
Continue...
|
6/12/2003
|
Hybrid laser-MIG welding of truck components
|
|
|
Alexander Kaplan
|
|
Inserted by:
Luleå University of Technology |
In December 2002 the truck supplier Ferruform AB, Luleå, Sweden, installed a 12 kW CO2-laser for welding of truck rear axes and recently started production. While this application has been developed to maturity during the last years, in parallel the Division of Manufacturing Systems Engine
Continue...
|
11/7/2002
|
Norlas Establishes Internet Presence
|
|
|
Steen Erik Nielsen
|
|
Inserted by:
FORCE Technology |
NORLAS is in the air.
|